When my first floppy discs slowly went unreadable I finally decided to create images of all of my physical media. However this is not as trivial as one would think: A lot of discs (especially games) have copy protections included, so you have to plan what you want to do. My goal is always to create 1:1 copies of the original discs. Please also note that the following information is to the best of my knowledge and / or future hardware may be able to circumvent some of today’s limits (though I doubt that’s too likely).

Without copy protection

ISO / disc dumps

Both terms are equivalent - a file used for optical media (CD, DVD, BlueRay) is usually called an ISO image, while images of other media (floppies, hard discs) often have the ending .img.

These images can be easily created with the UNIX command ‘dd’:

dd if=/dev/<device_you_want_to_make_the_image_from> of=<filename_of_the_image>

Note: While various forum entries praise these commands as the panacea of all copying needs, dd is in fact quite limited or even useless when dealing with copy protections. As dd operates on the UNIX file system, it can only copy the data section of any media - additional information like subchannel data is not visible on this layer and thus cannot be saved. Additionally dd will abort at any read error (or alternatively it will write zeros or skip those sectors completely) - even the most simple protections will check if the error is still there, which wouldn’t be the case any more. And dd will only save the first track of a disc, making it worthless to create copies of Mixed Mode or Audio CDs.

BIN / CUE (/ TOC)

This format has a lot of similarities to the ISO format - in fact, if the media has only a single session the resulting .bin file is exactly the same as the ISO file from above. The difference is that it is possible to store several tracks at once: The .bin file contains the binary data, the .cue file tells where and how to split the file for the individual tracks.

While the format is not an official standard it is easy to understand and has broad support among programs (e.g. almost every burning software and DOSBox, which will also play the audio tracks; notable exceptions are Virtual Machines (VMWare, VirtualBox) which are usually limited to ISO images / disc dumps).

The following commands will create the files:

cdrdao read-cd --datafile <filename>.bin --driver generic-mmc:0x00020000 --device /dev/<CD_DEV> <filename>.toc
toc2cue <filename>.toc <filename>.cue

This first command will create this .bin file and a .toc file (instead of expected .cue file). cdrdao is using the toc files internally, but it offers the converter toc2cue to generate the more common CUE file from that. Another thing to note is the option “–driver generic-mmc:0×00020000”: Most modern CD drives will return audio data in little endian order, however most programs expect the data in big endian order. You can also switch the order later, you can find a handly little program on http://www.ssokolow.com/scripts/index.html#swab.py

Note: I couldn’t get cdrdao to create usable images of copy protected discs, though the options “–read-raw” and “–read-subchan=rw_raw” sounded like they could do so (though the later option will create BIN/CUE files which are not compatible with other programs).

Copy protected discs

Old protection systems (- ~2002)

Old protection systems are based on defect sectors and / or subchannel data. Both of them can be stored with cdrecord:

readcd dev="/dev/<CD_DEV>" -clone -nocorr retries=0 f="<filename>.raw"

New protection systems

… will not work. The reason is simple: The current hardware is not able to create images that are exactly like the original - some programs check for physical properties of the disc, others will create unreachable sectors etc.

While workarounds DO exist it, they require emulation, modified binaries or additional data on the discs. The manufacturers of copy protection mechanisms finally seem to have found a way to really prevent to be able to copy a CD…

Even if the hardware should support all those techniques one day, you still have to invent a new image format to be able to store that information in Linux and extend the burning software to use it.

Note: This blog post is the long version of the article. For a short HOWTO better visit the Squeezebox forum post.

Prelude

Welcome to another chapter of the series “Making devices do things they weren’t designed for” ;-)

Before you get too excited because of the title I should probably warn you: This solution is a hack. When following this guide you will be bypassing SqueezePlay (meaning no integration into the devices’ GUI) and the solution is not really straightforward either (i.e. more complicated than you may be willing to accept). Also a decent amount of Linux knowledge is required.

Looking on the bright side: You will be able to watch videos after this tutorial - you may even want to experiment yourself and find more effective ways to do some things or work on the integration into SqueezePlay and Logitech Media Server :-)

This article was written using a Squeezebox Radio, however I don’t see any reason why it shouldn’t also work for the Squeezbox Touch or Squeezebox Controller. If you try it with any of those please drop me a note if it worked!

The goal

Watching videos on the Squeezebox!

The hardware

Newer Squeezebox devices (i.e. all devices with a LCD display) have an ARM processor and are running an embedded Linux. The devices aren’t really powerful - Radio has a 400 MHz CPU with integrated audio acceleration, but no floating point or video acceleration unit. In fact it is way too slow to play most of today’s video contents from the web, as most newer codecs (like MPEG4/H.264 or OGG Theora) require a lot of computing power.
The embedded Linux system is very minimal and mainly exists to run SqueezePlay (called jive in the process list), using a framebuffer driver for graphics and an ALSA driver for audio output. The system itself, using kernel 2.6.26.8, is stored on 128MB of flash memory, which is formatted with UBIFS.
To access the device we will be using SSH (if you are on Windows you may use Putty or similar programs for this).

Choosing a video player

We want to play videos, so we have to find some video playback program that can be used on the Squeezebox. There are several good video players for Linux, and most of them will run on Squeezebox’ ARM architecture. The only additional requirement is framebuffer output, as that is everything the Squeezebox has. Several candidates match these requirements, among them are

• xine
• MPlayer and
• ffplay

In this tutorial we will be using MPlayer because it has a few advantages which make it perfect for a quick hack:

• The package is self contained, i.e. it already contains all required libraries, making it much easier to compile
• Most of the libraries can be statically linked into the binary, so only a few additional files are needed on the Squeezebox.

Compiling MPlayer

Note: This step can be quite a lengthy process, so you may just skip it and download the binaries I have built from here instead: http://digitalimagec … s/mplayer_arm.tar.gz
(You may also try to use a mplayer binary from another Linux distribution for ARM, however those usually have a lot of dependencies…)

First you have to set up a cross compile environment to build MPlayer for the Squeezebox. Please follow the instructions from SqueezeOS Build Instructions Wiki page to do so.

When you have set up your environment download the MPlayer source and extract it. Change to the directory containing the MPlayer source and enter the following commands:

SQUEEZEOS="<enter path containing the poky directory from your SqueezeOS checkout>"
./configure --enable-cross-compile --host-cc=gcc --cc="${SQUEEZEOS}/poky/build/tmp-jive/cross/armv5te/bin/arm-none-linux-gnueabi-gcc" --target=arm-linux --enable-alsa --extra-cflags=-I"${SQUEEZEOS}/poky/build/tmp-jive/staging/armv5te-none-linux-gnueabi/usr/include" --extra-ldflags=-L"${SQUEEZEOS}/poky/build/tmp-jive/staging/armv5te-none-linux-gnueabi/usr/lib"
make

Your will find the resulting binary in the root directory of the MPlayer source. You will also need three libraries from your SqueezeOS build: libncurses.so.5.0.4, liblzo2.so.2.0.0 and libjpeg.so.62.0.0:

MPLAYERFILES="<enter a path where you want to store the files for your Squeezebox>"
cp mplayer "$MPLAYERFILES"
cd "$MPLAYERFILES"
cp "${SQUEEZEOS}/poky/build/tmp-jive/work/armv5te-none-linux-gnueabi/ncurses-5.4-r11/image/usr/lib/libncurses.so.5.0.4" libncurses.so.5
cp "${SQUEEZEOS}/poky/build/tmp-jive/work/armv5te-none-linux-gnueabi/lzo-2.02-r1/image/usr/lib/liblzo2.so.2.0.0" liblzo2.so.2
cp "${SQUEEZEOS}/poky/build/tmp-jive/work/armv5te-none-linux-gnueabi/jpeg-6b-r6/image/usr/lib/libjpeg.so.62.0.0" libjpeg.so.62

(The version numbers of the libraries are from SqueezeOS 7.7, change them if you use another version.)

Finding a /home

Now that we finally got our binaries we just have to copy them to our Squeezebox and use them. But - surprise - there’s trouble ahead: The root file system doesn’t have enough space to store our files. And even worse: We can’t change that: The (old) kernel doesn’t support mounting more than one UBIFS file system, so even if we add another UBIFS volume using unallocated space we will not be able to mount it - see http://lists.infrade … 009-July/026422.html for details.
However ‘df’ reveals another possible location for our files: /dev. When looking at the ‘mount’ output we see can see that it’s mounted with tmpfs, so we will loose all files from there after a reboot - but hey, we don’t have any other chance, do we?

So for now, copy the mplayer binary and the library files to your Squeezebox:

scp "$MPLAYERFILES"/* root@<IP of your Squeezebox>:/dev

Trying to play a video

If you want you can try to play a video now. First of all make sure that your device is turned on (i.e. you can see the menu). Now log into your Squeezebox and enter the following commands:

cd /dev
export LD_LIBRARY_PATH="$LD_LIBRARY_PATH":/dev
./mplayer http://archive.org/download/test-mpeg/test-mpeg_512kb.mp4

Not very successful, is it? Press Ctrl+C to cancel the video. It seems that the video won’t start because the audio device cannot be opened. Looking around which process is blocking the device we see that it’s Jive. Rings a bell? This is the Squeezebox GUI…

Let’s try to turn it off:

/etc/init.d/squeezeplay stopwdog     # Important: Always use the option "stopwdog" (instead of "stop"), otherwise your Squeezebox will reboot after a few seconds.
./mplayer http://archive.org/download/test-mpeg/test-mpeg_512kb.mp4

Well… At least we are seeing something. You may have noted a few things:

1. The picture is rotated
2. Even if it would have the correct orientation it would be too big
3. The movie is way too slow
4. The sound is way too loud (if there was any)

Let’s try to optimize things a bit:

./mplayer -volume 50 -vf rotate=2,scale=240:320 -vfm ffmpeg -vo fbdev -framedrop http://archive.org/download/test-mpeg/test-mpeg_512kb.mp4

Still too slow, but we’re coming closer otherwise.

Let’s try the same command, but this time with a MPEG-1 video instead of MPEG-4:

./mplayer -volume 50 -vf rotate=2,scale=240:320 -vfm ffmpeg -vo fbdev -framedrop http://archive.org/download/test-mpeg/test-mpeg.mpg

Finally! Not perfect, but something we can start with.

Recoding the video

As we can see the Squeezebox isn’t fast enough for any real world video playback, so we have to recode the videos (similar to watching videos on Sony’s PSP ;-)).

There are dozens of video transcoding programs for all platforms - it doesn’t matter what program or operating system you use for this step. You do, however, have to put the transcoded video on a webserver or provide a live stream (i.e. some remote protocol mplayer can handle like HTTP, FTP or RTP) if you are using a Squeezebox Radio; Touch and Controller users should also be able to use the external storage. Personally I’m using an Excito B3, a small Linux based NAS, to convert and serve the videos via HTTP.

I’m using ffmpeg for video conversion. Another popular program (also available for Windows users) would be VLC which also offers a graphical interface. Both programs also support video streaming, so if your PC is fast enough you may try to recode your video in realtime.

Example: My daily script to recode the tagesschau.de stream at 8:00 PM

#!/bin/bash -x

# Get the filename of the stream and periodically check if has been uploaded yet
cd /tmp
filepattern="`date +http://media\\\.tagesschau\\\.de/video/%Y/%m%d/TV-%Y%m%d-.*\\\.h264\\\.mp4`"
VIDEOFILE="/tmp/tagesschau.mpeg"
retries=0
while [ ! "$filename" ]; do
        wget http://www.tagesschau.de/export/video-podcast/tagesschau/
        filename=`grep -o "$filepattern" index.html`
        rm index.html
        if [ ! "$filename" ]; then
                let retries++
                if [ $retries -gt 60 ]; then
                        rm "$VIDEOFILE"
                        exit 1;
                fi
                sleep 180;
        fi
done

# Convert the stream
ffmpeg -y -i "$filename" -vcodec mpeg1video "$VIDEOFILE"

Btw: If anyone finds an all-purpose call for ffmpeg converting from any format to something suitable for the Squeezebox please post a comment :-)

Mission accomplished: Now just play your converted file, using the playback command from the last chapter :-)

Bonus: Automatic video playback

If you want to initiate playback remotely there are a few other things to consider: First of all the speaker is turned off when the Squeezebox is not active, so it has to be turned on first. I’m using the CLI interface of the Logitech Media Server to do so. To automate the calls you should also log in to your Squeezebox with a certificate (instead of username and password) to avoid being asked to enter them manually.

The following script is run on my server hosting the Logitech Media Server:

#!/bin/bash

DEVICENAME="<Name of your Squeezebox device (from Logitech Media Center)>"
SQUEEZEBOX="<IP or DNS name of your Squeezebox device>"
VIDEO_URL="<URI of the file to be played (e.g. http://archive.org/download/test-mpeg/test-mpeg.mpg)>"
USERNAME="" # Only required if your Logitech Media Server is password protected
PASSWORD="" # Only required if your Logitech Media Server is password protected

# Turn on Squeezebox
cat << EOF | expect
        spawn nc -q 3 localhost 9090
        sleep 2
        if { "$USERNAME" != "" } {
                send "login $USERNAME $PASSWORD\r"
        }
        send "$DEVICENAME power 1\r"
        send "$DEVICENAME display Video%20playback%20will%20begin shortly... 60\r"
        expect "shortly"
EOF

# Copy required programs to the Squeezebox
cd /opt/squeezebox
scp libncurses.so.5 mplayer liblzo2.so.2 libjpeg.so.62 root@${SQUEEZEBOX}:/dev

# Remotely prepare the Squeezebox and play the video
ssh root@${SQUEEZEBOX} " \
  /etc/init.d/squeezeplay stopwdog; \
  cd /dev; \
  export LD_LIBRARY_PATH=.; \
  ./mplayer -volume 50 -vf rotate=2,scale=240:320 -vfm ffmpeg -vo fbdev -framedrop "$VIDEO_URL"; \
  /etc/init.d/squeezeplay restart; \
"

Es gibt ja immer mal wieder das Problem, dass ALSA Soundkarten in der falschen Reihenfolge erkennt - dann wird statt der eigentlichen Soundkarte auf einmal der Eingang der TV-Karte oder der HDMI-Ausgang vom Monitor als primäre Soundkarte verwendet. Auch neuere Sounddaemons wie Pulseaudio helfen nur dann, wenn alle verwendeten Programme denselben auch unterstützen.

Workarounds gibt es mehrere, die vom Blacklisting der Kernelmodule über die Priorisierung der Ladereihenfolge gehen. Den schönsten und einfachsten Weg finde ich aber, einfach eine Datei /etc/modprobe.d/alsa.conf mit einer Liste der Module anzulegen, die man nicht haben will.

Bei mir sieht die Datei beispielsweise so aus:

options snd slots=,cx88_alsa,snd_hda_codec_nvhdmi

Wichtig ist das Komma direkt nach dem Istgleich: Damit sage ich, dass alles vor den beiden von mir unerwünschten Modulen kommen soll.

——

Leider kommen Programme, die fmod verwenden, nicht damit zurecht - hier muss weiterhin eine Standard-Soundkarte festgelegt werden:

cat /proc/asound/cards

listet die verfügbaren Karten auf, die Standardkarte lässt sich dann in der Datei /etc/asound.conf (systemweit) oder ~/.asoundrc (für den Benutzer) festlegen, indem man dort folgenden Eintrag hinzufügt:

pcm.!default {
    type hw
    card <Name der Karte>
    hint.description "default"
}
ctl.!default {
    type hw
    card <Name der Karte>
    hint.description "default"
}

Für den hint.description-Eintrag siehe auch https://qa.fmod.com/ … s-the-back-end/20188.

Wer gerne ältere Spiele mit DOSBox spielt stößt vielleicht auf das Problem, dass bei CUE-Images statt des tollen Audio-Soundtracks nur statisches Rauschen abgespielt wird. Wer seine CDs nicht noch einmal sichern will, den bringt das nachfolgende Programm zum Ziel:

http://www.ssokolow.com/scripts/index.html#swab.py